How To Set Time On A Timex Watch

Download Commodity

Download Article

• Engagement and Time Selection
|
• Alert Setup
|
• Pace and Splits Tracking

The Timex Ironman is a sports watch that allows you to time and runway your athletic performance. Information technology has several features that you have to set for accuracy. Set the date and time and then all the clock'due south readings are accurate. Stay on time by setting the spotter's alert features. Finally, use the Chrono setting to measure and track your laps while yous run.

1. ane

   Printing and hold downward the "Set/Recall" button to open the fourth dimension prepare menu. This push is located at the superlative left side of your Timex. Hold the button down for 3-5 seconds to enter the fourth dimension set menu. After that time, the screen will read "Set up" beyond the superlative.^[1]

   • At any time during this procedure, pressing "Set/Recall" again closes the time set menu and saves all your changes up until that point. If you've made all the changes you wanted to make, then press "Set/Recall" to salvage them without scrolling through the whole card.

2. two

   Select the time zone with the "+" or "-" buttons. The Timex allows you to set the time for 2 or 3 dissimilar time zones, depending on the model. You'll automatically be in time zone one when you enter the time set carte. If you desire to set time zone 2 or 3, press the "+" push to move the fourth dimension zone forward. Press the "-" button to movement it back.^[2]

   • The + button is located on the front of the spotter straight beneath the watch confront, and the - push button is located on the bottom right side of the watch.
   • On some Timex models, the + button reads "Offset/Split" and the – button reads "Finish/Reset."^[iii]
   • This characteristic is useful for checking the time in another part of the world quickly. If you practice business or take to make a telephone phone call to different time zones, information technology'south handy to stay organized.

   Advertisement

3. 3

   Set up the time with the "Fashion" and + or - buttons. The Mode button is in the lower left of the spotter. On the digital screen, this area will read "Next." This button cycles the carte between the hours, minutes, seconds, day, and date, in that order. Printing it to brand the hours on the watch face flash. Use the + or – buttons to bike the hours frontwards or backwards. Then printing Manner again to brand the minutes flash. Cycle through the minutes with the + or – keys besides, and so practice the same for the seconds.^[four]

   • If you only wanted to set the time and leave the date alone, press Prepare/Recall after this pace to salve your progress and close the card.

4. 4

   Choose the current day of the calendar week. After setting the fourth dimension, press Mode again. The day department above the time will start flashing. Cycle forrard with the + button and backwards with the – button. And so press Manner over again when yous've chosen the right day.^[5]

5. 5

   Set up the appointment with the Mode and + or – buttons. When you press Mode subsequently setting the day, the month (in number form) will first flashing. Select the correct month with the + and – buttons. Then press Fashion again and select the electric current date.^[vi]

6. 6

   Choose if yous want the time displayed in 12 or 24-hour style. When you press Manner after setting the date, the carte du jour changes to 12 or 24-hour time fashion. The mode you're currently in will flash. Use the + push to cycle between both time settings, and press Mode when y'all pick one.^[7]

   • The advantage of 24-hour time is that you don't have to bank check if the time is AM or PM. It's easier to tell what office of the day information technology is with a quick glance.

7. 7

   Salvage your changes by pressing the Set up/Reset button. This push button closes the card and brings you back to the normal watch brandish. The changes you made will be saved.^[8]

   • If the time or date looks incorrect, you may have set them incorrectly. Printing Set/Reset again to open the time menu back up and check your settings.

Advertisement

1. 1

   Press Mode until Alarm appears on the watch brandish. Cycle through the options to get to the warning menu. If your Timex model allows you to set multiple alarms, select ALM1 by pressing Stop/Reset.^[nine]

   • To set multiple alarms, go on pressing Mode to find ALM2 and ALM3. Select each one with Terminate/Reset.

2. 2

   Use Set/Recall and the + and – buttons to set the alarm time. Set/Call up opens the alarm menu. By default, the time will appear and the hours will exist flashing. Adjust the hours up and down with the + and – buttons. Press Fashion (Adjacent) to brand the minutes flash and do the same thing. Press Mode once again to select whether you want the warning to sound in the AM or PM.^[ten]

   • If your lookout man is fix to 24-hour time, you don't have to select AM or PM.

3. 3

   Make up one's mind if you want the alarm to band weekdays, weekends, or daily. Press Manner after setting the alarm time. The option above the fourth dimension volition begin flashing. This will say "Daily," "Wkday," or "Wkends," depending on where yous last had it prepare. Press Starting time/Split to cycle through the options and select how often you want the alarm to sound.^[xi]

   • If you simply desire the alert to ring on one day, disable it subsequently it rings.

4. iv

   Press Set/Recall to relieve the alarm. This programs the warning into your sentinel memory. The alarm will audio on the times and days that you gear up it to.^[12]

   • A small clock icon appears on the left of your watch display to permit you know that an alarm is active.

5. 5

   Open the warning menu and printing Offset/Carve up to turn the alarm off. Get to the alert bill of fare past cycling through the Mode button until yous reach Alert. Then printing Beginning/Split up to toggle the alert off.^[13]

   • To reactivate the alert, do the same deportment and hit Kickoff/Separate to toggle the alarm back on.

Advertisement

1. 1

   Press Mode until "Chrono" appears on top of the screen. Chrono is the mode you use to rails your split and lap times. It's the 2nd selection subsequently the main clock.^[14]

   • If you scroll also far and miss Chrono mode, continue pressing Mode to cycle through the lookout man options. The watch modes are Clock, Chrono, Timer, and Alarm. Cycle back to Chrono if you miss information technology the first time.

2. ii

   Set the Lap and Split up setting by pressing Set/Recollect. Y'all take two options for the Chrono setting. One displays the current lap time larger with the overall split time smaller. The other reverses the order, and shows the split fourth dimension larger. Cycle between them with the Get-go/Split button. And so press Set/Recall once more when you choice a format.^[15]

   • If you're trying to improve your lap fourth dimension, ready the Lap to appear larger. This style, you lot can see how your laps are measuring upwardly.
   • If you're just timing your run without tracking laps, and then displaying Dissever larger is more useful.
   • The watch keeps the format that yous picked for every time you use the Chrono unless you change it once again.

3. three

   Start the Chrono with the Showtime/Split up button. This begins the timer. First your workout and use the Chrono to check your current time. If you're only measuring your overall run or exercise fourth dimension, then just permit the timer go. If you want a specific lap or dissever time, the Chrono can too measure this.^[sixteen]

4. 4

   Go your current lap time by pressing the Starting time/Split button. If you lot're tracking your lap progress, printing the Start/Split push button when you complete a lap. The timer display will show your lap time for 10 seconds and then you lot can read it. The timer continues running in the background and switches back after 10 seconds.^[17]

   • Yous can use this characteristic for any measurement. Whether y'all're tracking your time per lap, mile, kilometer, or another distance, the Chrono will measure out it when you striking Start/Split.
   • Repeat this for equally many laps as yous're running to become the time for each lap.

5. 5

   Pause the timer with the Stop/Reset push. If yous need a break or desire to talk to someone, pause the timer past pressing Stop/Reset. Then when yous're prepare to commencement again, press Commencement/Divide to resume the timer where it paused.^[eighteen]

   • Be careful not to accidentally hitting Stop/Reset again to start the timer. This volition erase your current workout and y'all'll have to start over.

6. 6

   Store the workout by pressing Set/Recall when you lot're washed. When you're done, terminate the timer past pressing Stop/Reset and so holding the same button to reset the information. If you want to store and review your conditioning results, hold Set/Recall to save the data.^[19]

7. seven

   Review your conditioning by pressing Set/Recollect. This brings you to the conditioning information menu. All the results yous've stored are on this menu by date. To review your workouts, use + and – to roll to the one you want to view. Then press Next (or Mode) to open a specific workout.^[20]

   • When on a specific workout, you can view each lap of your run plus the total fourth dimension.
   • To clear a workout, hold Stop/Reset for 5 seconds. When the sentry beeps, the last stored conditioning is deleted.
   • Continue property the button to erase all workouts and free up all the spotter retention.

Advertising

Add New Question

• Question

  How do you count laps on a Timex Ironman?

  

  This answer was written past one of our trained squad of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Y'all can count laps by putting your watch in CHRONO style. Hit the Mode push until CHRONO appears on the brandish, and then press START/Split up to brainstorm CHRONO. Hit START/SPLIT again to create a separate between laps. STOP/RESET volition terminate Chrono mode, and Fix will store your workout. Your watch can count upwards to 99 laps and volition store 50.

• Question

  How do I set up the day on my Timex watch?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Go into Time style and press and hold SET. Hitting Side by side to cycle through the different elements of the TIME mode until you go to the mean solar day of the week or month, then utilize the +/- buttons to get up or downward to the correct day. Press DONE when you're finished.

• Question

  Can you swim with a Timex Ironman?

  

  This answer was written by 1 of our trained team of researchers who validated information technology for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yes, the Ironman is h2o resistant, so it's okay to utilise information technology while pool swimming. Avoid pushing the buttons while you're in the water, since this could permit h2o into the watch. Don't use it while diving.

• Question

  How exercise I change the twenty-four hour period of the week if the option for changing the day doesn't appear while I am setting the sentinel?

  

  I had this trouble on my blackout Timex Ironman. It turns out that I had the wrong appointment set. Once you prepare the correct engagement, information technology will automatically correct the day of the week on its own.

• Question

  Do I have to set the clock to 2022 instead of 2022 to get the day of the week and date to be correct?

  

  No, it is 2022. You take to gear up to the correct year, date, month and time to ready your Ironman.

• Question

  What time zone is Toronto in?

  

  Stephen Leccese

  Community Answer

  Eastern Standard Time, aforementioned as New York and the rest of the East Coast in the US

Inquire a Question

200 characters left

Include your electronic mail accost to get a message when this question is answered.

Submit

Ad

Cheers for submitting a tip for review!

About This Commodity

Commodity Summary X

To set up your Timex Ironman, y'all'll offset need to select the correct date and time. Push downwards on the "Fix/recall" button until the Set menu appears. Then, use the plus, minus, and "Way" buttons to select the correct appointment and time. When you're washed, press the "Set/recall" push to save your changes. In one case you've gear up the fourth dimension, yous can also ready alarms. Just press the "Mode" button until the alarm menu appears on the display. Select information technology past pressing the "Set/recall" button, then select the time for your alarm using the plus and minus buttons. Later on you set the alarm, you can too choose how often it should ring, such as daily, on week days, or at weekends. For tips on how to measure your running times with your Timex Ironman, keep reading!

Did this summary assist you?

Thanks to all authors for creating a page that has been read 140,381 times.

Did this article aid you?

Source: https://www.wikihow.com/Set-a-Timex-Ironman

Share this post